# Nearly finished Bridge v1 and bought a bunch of templates--so what next?

**URL:** <https://forum.barbellmedicine.com/t/nearly-finished-bridge-v1-and-bought-a-bunch-of-templates-so-what-next/9467>\
**Category:** Training Q&A \[Moderated\]\
**Created:** [September 11, 2020, 12:00am UTC](https://forum.barbellmedicine.com/t/nearly-finished-bridge-v1-and-bought-a-bunch-of-templates-so-what-next/9467 "2020-09-11T00:00:12Z")\
**Posts on this page:** 7\
**Page:** 1

<div class="post-metadata">

**Author:** ![Brahms](https://avatars.discourse-cdn.com/v4/letter/b/db5fbb/32.png) [@Brahms](https://forum.barbellmedicine.com/u/Brahms)\
**Post date:** [September 11, 2020, 12:00am UTC](https://forum.barbellmedicine.com/t/nearly-finished-bridge-v1-and-bought-a-bunch-of-templates-so-what-next/9467/1 "2020-09-11T00:00:12Z")

</div>

I’m midway through Week 8 of The Bridge v1, and it’s time to think about what’s next. I’m not sure my lifts got much higher. But I enjoyed learning RPE, the new lifts, etc. so I consider it a success. I also hit a few heavy singles I’d never actually done before, so that’s a win, too.

40 y.o. male, 5’10", 165 lbs

Changes in e1rm (in lbs):  
Press: ~150 → ~155  
Bench Press: N/A → ~168 (I’d not really trained bench until now)  
LBBS: 325 → 335  
DL: 330 → 355

My goals wrt programming are as follows, in priority order:

1. Lift three days a week with programs that work for a COVID home gym (squat rack, barbells). I don’t have access to belt squats, leg presses, etc.
2. Improve on bench press and DL. My DL is pretty far below my all time high e1rm of ~425.
3. Hypertrophy.
4. Perform heavy singles.

What should I do next? I’ve bought the Bridge v3, HLM, and Hypertrophy I–but I’m open to rerunning Bridge v1 if it makes sense. I was very conservative with the RPEs.

---

<div class="post-metadata">

**Author:** ![Jordan\_Feigenbaum](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.barbellmedicine.com/jordan_feigenbaum/32/1315_2.png) [@Jordan\_Feigenbaum](https://forum.barbellmedicine.com/u/Jordan_Feigenbaum)\
**Post date:** [September 11, 2020, 3:24pm UTC](https://forum.barbellmedicine.com/t/nearly-finished-bridge-v1-and-bought-a-bunch-of-templates-so-what-next/9467/2 "2020-09-11T15:24:01Z")

</div>

I think Bridge V3.0 would be the move here, then hypertrophy I, then HLM. I think you’ll do great!

-Jordan

---

<div class="post-metadata">

**Author:** ![Brahms](https://avatars.discourse-cdn.com/v4/letter/b/db5fbb/32.png) [@Brahms](https://forum.barbellmedicine.com/u/Brahms)\
**Post date:** [September 12, 2020, 7:11pm UTC](https://forum.barbellmedicine.com/t/nearly-finished-bridge-v1-and-bought-a-bunch-of-templates-so-what-next/9467/3 "2020-09-12T19:11:07Z")

</div>

Thanks. I assume that maintaining my current bodyweight is fine for Hypertrophy I, right?

---

<div class="post-metadata">

**Author:** ![Jordan\_Feigenbaum](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.barbellmedicine.com/jordan_feigenbaum/32/1315_2.png) [@Jordan\_Feigenbaum](https://forum.barbellmedicine.com/u/Jordan_Feigenbaum)\
**Post date:** [September 13, 2020, 1:40am UTC](https://forum.barbellmedicine.com/t/nearly-finished-bridge-v1-and-bought-a-bunch-of-templates-so-what-next/9467/4 "2020-09-13T01:40:23Z")

</div>

> [@Brahms](#):
>
> Thanks. I assume that maintaining my current bodyweight is fine for Hypertrophy I, right?

If that is your preference based on goals, then yes of course 🙂

---

<div class="post-metadata">

**Author:** ![Brahms](https://avatars.discourse-cdn.com/v4/letter/b/db5fbb/32.png) [@Brahms](https://forum.barbellmedicine.com/u/Brahms)\
**Post date:** [September 18, 2020, 12:40am UTC](https://forum.barbellmedicine.com/t/nearly-finished-bridge-v1-and-bought-a-bunch-of-templates-so-what-next/9467/5 "2020-09-18T00:40:35Z")

</div>

Thanks. And I should only use the belt on lifts where it explicitly says “with belt,” right? I remember reading (or hearing) some Nuance™ about how beltless lifts provide intensity, but with less fatigue–so I assume the beltless lifts are that way on purpose.

---

<div class="post-metadata">

**Author:** ![LeahBBM](https://sea1.discourse-cdn.com/flex001/user_avatar/forum.barbellmedicine.com/leahbbm/32/17_2.png) [@LeahBBM](https://forum.barbellmedicine.com/u/LeahBBM)\
**Post date:** [September 24, 2020, 1:15am UTC](https://forum.barbellmedicine.com/t/nearly-finished-bridge-v1-and-bought-a-bunch-of-templates-so-what-next/9467/6 "2020-09-24T01:15:10Z")

</div>

Correct on the belt/unbelted lifts. That’s our general recommendation.

---

<div class="post-metadata">

**Author:** ![Brahms](https://avatars.discourse-cdn.com/v4/letter/b/db5fbb/32.png) [@Brahms](https://forum.barbellmedicine.com/u/Brahms)\
**Post date:** [March 8, 2021, 1:58am UTC](https://forum.barbellmedicine.com/t/nearly-finished-bridge-v1-and-bought-a-bunch-of-templates-so-what-next/9467/7 "2021-03-08T01:58:39Z")

</div>

OK, I’m almost done with HLM–what next? I didn’t make much progress except on bench, which will probably have gone up a little, at least. Part of the reason may be that I’m time constrained, and can really only get through the first two exercises before I have to get back to work. It’s pretty rare that I manage to get through all three–it usually means I had extra time on my hands due to a cancelled meeting.
